Introductory Information; Commissioning; Terminology; Your System Is Preset At The Factory - Viessmann VITODENS 111-W Operating Instructions Manual

Commissioning

The commissioning and matching up of
the control unit to local conditions and
the building characteristics must be car-
ried out by your heating contractor.

Terminology

To provide you with a better understand-
ing of the functions of your Viessmann
control unit some terminology is
explained.
The terms are marked as follows.

Your system is preset at the factory

The control unit is preset at the factory
for standard operation.

Energy saving tips

Utilise the setting options for the control
unit and remote control (if available).

Introductory information

g Gas council no.
Rated heating
output range
kW
6.5 - 26
8.8 - 35
Further information can be found
in chapter "Terminology" in the Ap-
pendix.
Your heating system is therefore ready
for operation. You may change the fac-
tory setting in accordance with individual
requirements.
Central heating
■ Room temperature:
Never overheat your rooms. Every
degree of room temperature reduction
saves up to 6 % of your heating bills.
Set your room temperature no higher
than 20 ºC.
■ Operating modes:
Gas council no.
47-819-24
47-819-25
5