Starting the heating system
We recommend you contact your local
heating contractor if you are planning to
start up a heating system that has not
been used for a long period.
2
1
0
bar
Shutting down the heating system
Switching the Vitodens off with frost protection
Further information can be found
in chapter "Terminology" in the Ap-
pendix.
1. Check the pressure of your heating
3
2. With conventional flue operation
4
3. Open the gas shut-off valve.
4. Switch on the ON/OFF switch.
If you do not wish to use your boiler for
several days you can switch the unit
off.
Start-up/shutdown
system on the pressure gauge.
Minimum system pressure
0.8 bar.
If the system pressure is too low,
please notify your heating contrac-
tor.
(combustion air is taken from the
boiler room):
There must be fixed permanent ven-
tilation into the boiler room.
Your heating system and room tem-
perature control unit (if connected)
are now ready for operation.
9