Maintenance And Cleaning; "Warning Temper" Indicator - Ask Proxima E1655U Owner's Manual

"Warning Temper" indicator

The "Warning Temper" indicator tells in what protection state engaged. The user should
check the "Warning Temper" indicator and power indicator to make sure they work.
Projector is in OFF state, and "Warning Temper" indicator flashes red.
When its internal temperature exceeds the normal value,
will be automatically powered off to protect the parts.
When in a cooled state, the power indicator will blink.
When it is cooled enough (restore the normal operating
temperature), you can press the power key to start up
the system.
√ Note:
When restores its normal operating temperature, the
"Warning TEMP" indicator will flash continuously. If you
re-start the projector, it will stop flashing.
Check the items below:
-Whether the site where installed is well
ventilated, and whether the vent is blocked.
-Whether installed near the vent of air
conditioner. Note it can not be installed at that place.
-Whether the filter is clean. You should clean it
regularly.
Projector is in OFF state, and "Warning TEMP "
indicator is illuminated red.
When any abnormity is detected, The projector
will be automatically powered off to protect its internal
parts. At the time, the "Warning TEMP" indicator will
be illuminated red. In this case, you should unplug the
power cord and plug it again, then power on the
projector again for check. If the projector is still in OFF
state and "Warning TEMP" indicator is illuminated red,
you should unplug the power cord and contact the
repair center for maintenance.
Note:
When abnormity occurs, the user should cut
off the AC power. Otherwise, it may lead to
fire or electric shock.
On-top control panel
"Warning TEMP" indicator is illuminated red.
49
Maintenance