Lens Installation; Installing The Lens - Ask Proxima E1655U Owner's Manual

Installation

Lens installation

Follow the instructions below to install the lens upon replacing or using the provided lens. For the specification of
projector lens, contact your dealer.
Removing the lens
1
Shift the lens to the center with the lens shift
function.
2
Turn off the projector, and unplug the AC power
cord.
3
Press and hold the lens release button on the top
until the lens cannot be rotated.
Draw it out slowly from the projector.
Caution
Do not drop the lens when handling.

Installing the lens

1
Remove the lens decorator.
2
Align the red point on the lens with that on the
projector to install the lens.
3
Rotate the lens clockwise slowly until it clicks.
Make sure that the lens is the projector.
Caution
While installing the lens, do not hold the release button.
●
Do not touch or remove any part except lens and its relative part. This may cause a malfunction, electric shock,
fire or other hazards.
Make sure the mode of the lens is compatible with your projector before installing or replacing the lens.
●
For information about the lens and its installation, contact the local dealer.
●
counterclockwise
Notes on lens installation
18
Lens release button
Red point