Displaying The Firmware Version - Pioneer AVH-X5700BHS Owner's Manual

System settings
●
Dimmer:
Adjusts the brightness of the display. (+1 to +48)
●
Temperature:
Adjusts the color temperature, resulting in a better white
balance. (–3 to +3)
 With some pictures, you cannot adjust Hue and
Color.
 When you touch [Rear View] or [2nd camera],
the mode changes to the selected camera mode.
By touching [Source], [Navi] or [Apps], you can
return to the selected mode.
5 Touch , , , to adjust.
 The adjustments of "Brightness", "Contrast"
and "Dimmer" are stored separately when your
vehicle's headlights are off (daytime) and on
(nighttime).
 "Brightness" and "Contrast" are switched auto-
matically depending on whether the vehicle's
headlights are on or off.
 "Dimmer" can be changed the setting or the time
to switch it to on or off.
 Setting the dimmer on page 38
 The picture adjustment may not be available with
some rear view cameras.
 The setting contents can be memorized
separately.
Displaying the firmware
version
1 Display the "System" setting screen
 Displaying the "System" setting screen on page 37
2 Touch [System Information].
3 Touch [Firmware Information].
The "Firmware Information" screen appears.
Updating firmware
CAUTION
●
The USB storage device for updating must contain only the
correct update file.
●
Never turn this product off, disconnect the USB storage
device while the firmware is being updated.
●
You can only update the firmware when the vehicle is
stopped and the parking brake is engaged.
1 Download the firmware update files.
2 Connect a blank (formatted) USB storage
device to your computer, and then locate the
correct update file and copy it onto the USB
storage device.
3 Connect the USB storage device to this
product.
4 Turn the source off.
 Selecting a source on page 11
5 Display the "System" setting screen.
 Displaying the "System" setting screen on page 37
6 Touch [System Information].
7 Touch [Firmware Update].
8 Touch [Continue] to display the data transfer
mode.
p Follow the on-screen instructions to finish updating the
firmware.
p This product will reset automatically after the firmware
update is completed if the update is successful.
p If an error message appears on the screen, touch the display
and perform the above steps again.
Audio adjustments
Displaying the "Audio" setting
screen
1 Press .
2 Touch , and then .
The "Audio" setting screen appears.
Using fader adjustment
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 39
2 Touch [Fader].
3 Touch or to adjust the front/rear speaker
balance.
p "Front25" to "Rear25" is displayed as the front/rear speaker
balance moves from the front to rear.
p The default setting is "F/R 0".
p Set "Front" and "Rear" to "0" when using a dual speaker
system.
 You can also set the fader/balance by dragging
the point on the displayed table.
Using balance adjustment
p This function is available when "Standard Mode" is selected
as the speaker mode.
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 39
2 Touch [Balance].
3 Touch or to adjust the left/right speaker
balance.
p "Left25" to "Right25" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "L/R 0".
 You can also set the fader/balance by dragging
the point on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone application volume when the navigation outputs
the guidance voice.
39