Table of Contents
Advertisement
Example of connecting to video equipments
Computer for
control use
D-sub 9-pin
(male)
USB
Audio system
NOTE:
• Only one audio system circuit is available for the AUDIO IN L-R jacks for S-
VIDEO/VIDEO signals, so if you wish to change the audio input source,
you will need to remove and insert the appropriate plugs.
• Only one audio system circuit is available for the RGB AUDIO IN jacks, so
if you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.
• If an audio system is connected to the AUDIO OUT jack, the sound volume
balance can be controlled by the remote control unit which is supplied with
the projector.
• If the video signal source is connected using a cable with a BNC connector
plug, use a BNC/RCA adapter (sold separately) to convert the cable end to
an RCA plug-type jack.
• Refer to page
60
to the projector.
• If the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom function is being
used, this function will be cancelled.
D-sub 15 (male) - BNC5 (female)
adapter cable (sold separately)
Red (connect to P
Blue (connect to P
Green (connect to Y signal connector)
for a list of compatible YP
signal connector)
R
signal connector)
B
Digital broadcast
tuner or DVD player
DVD player
P
signals which can be input
B
R
Video deck
E
-23
NGLISH
Advertisement
Table of Contents
