Table of Contents
Advertisement
Projector <Back and bottom>
M
q Remote control signal receptor
(page 21)
w Security lock
This can be used to connect a
commercially-available theft-
prevention cable (manufactured
by Kensington). This security lock
is compatible with the Microsaver
Security System from
Kensington. Contact details for
this company are given below.
Kensington Technology Group
ACCO Brands Inc.
2855 Campus Drive
San Mateo, CA 94403 USA
Tel (650)572-2700
Fax (650)572-9675
http://www.kensington.com/
http://www.gravis.com/
NOTE:
• Information given above may be
changed in future.
e Lamp unit holder
(page 52)
r Carrying handle
t Air outlet port
Do not cover this port.
14-E
NGLISH
G
J
When you change the direction of
the air flow out of the outlet port,
make sure that the MAIN
POWER is "OFF" and the
projector is cooled down.
WARNING
Do not bring your hands or other
objects close to the air outlet
port.
• Heated air comes out of the air
outlet port. Do not bring your
hands or face, or objects which
cannot withstand heat close to this
port, otherwise burns or damage
could result.
NOTE:
• During projection of an image, the
cooling fan will operate, emitting a
small noise as it operates. Turning
the lamp on or off will cause this
noise to increase a little.
• By using the OPTION menu to set
"LAMP POWER" to "LOW", the
operating sound of the fan can be
reduced. (Refer to page 44.)
H
A
Advertisement
Table of Contents
