Connections; Notes On Connections; Example Of Connecting To Video Equipment; Example Of Connecting To Equipment Compatible With Yp ) Signals - Panasonic PT-AE200E Operating Instructions Manual

Connections

Notes on connections

B Read the instruction manual for each system component carefully before
connecting it.
B Turn off the power supply for all components before making any
connections.
B If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.

Example of connecting to video equipment

DVD player
To audio To S-Video output
output
Video/Audio cable
(accessory)
To audio To video output
output
Video deck
NOTE:
B Only one audio system circuit is available for the AUDIO IN L-R jacks, so if
you wish to change the audio input source, you will need to remove and
insert the appropriate plugs. (Except for AV1 signals)
18-E
NGLISH
AV1 output
DVD player
* This illustration is an example of
connection for the PT-AE300E.
Example of connecting to equipment compatible
with YP P (C C ) signals
B R B R
DVD player
To audio To YP
output output
NOTE:
B Refer to page 61 for a list of compatible YP
to the projector.
B Only one audio system circuit is available for the AUDIO IN L-R jacks, so if
you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.
P
B R
* This illustration is an example of
connection for the PT-AE300E.
P signals which can be input
B R
E
NGLISH
-19