About The Automatic Setup Function - Panasonic PT-L780NTE Operating Instructions Manual

About the automatic setup function

If you press the AUTO SETUP button, the items given in the table below will
be set automatically. The setting details change according to the signal
which is being input. Refer to the table below for details.
Horizontal/
position
VIDEO/S-VIDEO/
NETWORK/SD CARD
YP P
B R
DVI
Dot Clock
frequency
is 140 MHz
or higher
Signal other
than above
NOTE:
B If the edges of the projected picture are indistinct, or if a dark picture is being
projected, the automatic setup processing may stop automatically before it is
complete. If this happens, project a different picture and then press the AUTO
SETUP button once more, or make the above adjustments manually.
B If you would like to make further adjustments to the picture, use the menu
commands which are listed on page
62-E
NGLISH
Dot clock/
vertical
clock phase
Yes
Automatic
vertical
keystone
correction
Yes
Yes
Yes
No Yes
Yes
32 and subsequent pages.