Table of Contents
Advertisement
TG6521_6522NZ(e).book Page 35 Friday, April 16, 2010 2:15 PM
leave your answering machine off on
your unit (page 30). This will allow the
service to receive any messages.
L To use the unit's answering machine
rather than the service provided by
your service provider/telephone
company, please contact your service
provider/telephone company to have it
removed or deactivated permanently
or temporarily. Alternatively you can
leave this service connected and
change the "Number of Rings" to a
shorter duration on your unit so your
unit's answering machine can pick up
the call prior to the service provided by
your service provider/telephone
company.
Caller's recording time
You can change the maximum message
recording time allowed for each caller.
The default setting is "3 Minutes".
1
8 i {#}{3}{0}{5}
2
{V}/{^}: Select the desired setting.
i M i {ic}
Selecting "Greeting Only"
You can select "Greeting Only"
which sets the unit to announce a
greeting message to callers but not
record messages.
Select "Greeting Only" in step 2 on
"Caller's recording time", page 35.
Note:
L When you select "Greeting Only":
– If you do not record your own
message, the unit will play the pre-
recorded greeting-only message
asking callers to call again later.
– If you use your own message,
record the greeting-only message
asking callers to call again later
(page 31).
Answering System
35
Advertisement
Table of Contents
