Finishing Options; Two-Sided Printing - Ricoh MP 5001 Reference Manual

5.To switch between sheets, click the tabs for the appropriate area – Basic, Paper, Edit, Finishing, ....
Once the print settings are established, click 'OK' to begin printing
6. Select 'OK' to begin printing.
7. All the changes will not save after close the
application(s) since this is network printer.

Finishing Options

The following is a summary of some of the
available finishing features accessible through
the print options of the Ricoh 5001.
elect the available options from the
display list.
Collate – Sorted copies are
produced.
Staple – Copies are collated and stapled.
Punch – Copies are 2 or 3 hole punched.
3. Once all finishing options have been made, select 'OK'.
4. Enter the number of document copies desired. Select 'OK' to begin printing.

Two-Sided Printing

Duplex or two-sided printing occurs when the Ricoh produces documents with print on both sides of the
paper.
1. The user can adjust the position of the document and margins to ensure all information is captured
when producing the two-sided document.
2. Once all finishing options have been made, select 'OK'.
3. Enter the number of document copies desired. Select 'OK' to begin printing.
7