Safety at all times. GENERAL SAFETY WARNINGS ■ Maintain tools with care. Keep cutting tools sharp and clean for better and safer performance. Follow WARNING instruction for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have When using electric tools, basic safety precautions them repaired by an authorized service facility.
Safety installing or removing wheels, or when not in use. ■ Cutting hard metal iron stock such as square bar stock and angle iron. ■ Check the wheel for fissures and cracks, and test for normal operation prior to use. ■...
Page 5
Safety Waste electrical products should not be disposed of with household waste. Please Waiting time recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Wear safety hand gloves ICONS IN THIS MANUAL Unpacking Tools needed Procedure search Go to page # Safety...
PRODUCT SPECIFICATIONS Net weight 17.5 kg Wheel type Reinforced abrasive wheels Wheel diameter 355 mm Bore diameter 25.4 mm No-load speed 3,800 +/-10% min Input 220V - 240V ~ 50 Hz Power 2,200 W Fence angle Right 45˚ / Left 45˚ Vice clamp angle Right 45˚...