System Scan (Trunking Format); Scanning Trunked Systems; Scanning Conventional Systems - Kenwood TK-481 Instruction Manual

SYSTEM SCAN (Trunking Format)

If the Scan function is programmed, systems can be
scanned by pressing the key programmed as Scan.
When the Scan key is pressed, the SCN indicator and
"-SCAN-" or the revert system/ group number, appear on
the display and scanning starts. The systems not locked
out of the scanning sequence are scanned.
When a call is received, scanning stops and the system
and group digits appear. Press the PTT switch and
speak into the microphone to respond to the call. The
transceiver will continue scanning after a predetermined
time delay if the PTT switch is released and no further
signal is received.

■ Scanning Trunked Systems

When scanning trunked systems, the revert groups
and the groups not locked out of the scanning
sequence are scanned. See "GROUP SCAN" on
page 18.

■ Scanning Conventional Systems

When scanning conventional systems, the revert
groups and the groups not locked out of the scanning
sequence are scanned. See "GROUP SCAN" on
page 18.
16