Peavey PXR 1000 Operating Manual page 6

Effects Section
KOSMOS
19
The Kosmos -C module uses special circuitry
to enrich the sound of your system. The
low control is not just a simple bass boost.
It provides 'natural bass enhancement' by
adding harmonically related bass signals that
track envelope of the original signal. The
Kosmos-C, High control can be used to add
clarity to dull signals.
MASTER MUTE LED
20
When the LED is ON it indicates the master
mute is activated.
MASTER MUTE
21
Depressing this button mutes channels one
through seven, preventing signal from pass-
ing to the power amplifier. This button does
not affect channel 8.
EFFECTS TYPE TABLE
22
This table lists the type of effects available
and the abbreviation used for that effect in
the first character of the LED display. The
chart also lists the parameter associated with
the effect that is controlled by turning en-
coder 24. A more detailed list of effects can
be found at the end of this manual.
EFX LED
23
This LED indicates the type of effect currently
selected. When turning encoder 27 the dis-
play will flash until the encoder is depressed,
selecting a new effect.
PARAMETER CONTROL
24
This encoder controls the parameter associ-
ated with the selected effect, listed both on
the mixer (23) and in this manual. The param-
eter control is used to make adjustments to
the sound of the effect.
CLIP LED
25
This LED blinks RED when the signal to the effects section is too hot and is causing distortion. Find the
source of the hot signal by reducing the EFX SEND (5) on each channel until the LED is no longer clipping
(blinking red).
EFX MUTE
26
When pushed this button bypasses the effects section, letting the user listen to the dry signal. When de-
pressed and muted, LED 23 displays two dashes "--".
EFFECTS SELECT
27
Turn and push this encoder to select the desired effect.
®
-C
19
20
21
23
24
18
22
22
25 26
27