Bluetooth Operation - Peavey PXR 1000 Operating Manual

Bluetooth® operation
To listen to your music via Bluetooth wireless connection, you need to pair
(link) your PXR 1000 with your Bluetooth phone and/or music device.
1. Turn off any Bluetooth devices previously paired with your PXR 1000.
2. Turn on the Bluetooth feature on your phone or music device.
3. Slide the switch (29) to the right to turn on the Bluetooth feature.The
Bluetooth LED (30) will flash to indicate your PXR 1000 is in discoverable mode.
4. Place your phone or music device in Bluetooth search mode.
The phone or music device will now begin searching for your PXR 1000.
5. Select Bluetooth audio from search results on your phone or music
device.
6. Select OK or Yes to pair your speaker system with your phone or music
device.
29 30
When your PXR 1000 successfully pairs and connects with your phone
or music device, the Bluetooth indicator changes from flashing green to
steadily lit. You will now be able to play music from your connected music
source through your PXR 1000. The level can either be adjusted from the
connected source or by the level control in Channel 8.
* Wireless range can vary depending on Bluetooth class of source device,
and be subject to interference from obstructions such as walls or other
electronic devices.
22