Toshiba Satellite Pro U300 Maintenance Manual page 232

Replacement Procedures
8. Remove the following screws securing the LCD unit.
•
M2.5x4.0 BINK HEAD screw
9. With the bottom edge of the LCD unit on the display cover, lift only the top edge of
the LCD unit. After peeling off the CONDUTIVE tape, disconnect the LCD harness
from the connector on the back of the LCD.
10. Remove the LCD unit.
M2.5X4.0 BINK HEAD
LCD harness
LCD unit
Figure 4-33 Removing the LCD unit
4-54Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)
x6
M2.5x4.0 BINK HEAD
CONDUTIVE tape