Usb Board - HP ENVY 17-n100 Maintenance And Service Manual

USB board

Description
USB board
USB board cable
Before removing the USB board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
Remove the USB board:
1. Disconnect the cable (1) from the USB board and lift the cable (2) from the routing channel.
2. Remove the two Phillips PM2.5×5.0 screws (3) that secure the USB board to the computer.
3. Lift the USB board (1).
40 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 27).
Optical drive on page
Bottom cover on page
28).
31).
Spare part number
813794-001
813793-001