Hitachi L26-H03B Service Manual page 9

2. Choose "PQCOFF" by R/C [上／下] button. Then choose value "1" by R/C [左／右] button, then press [決定].
3. Choose "SAVE" by R/C [上／下] button. Then choose value "1" by R/C [左／右] button, then press [決定]. (After
this, value returns to "0" automatically.)
4. Return to "FACTORY MODE" by R/C [もどる] button. Then choose "COLOR TEMP" by R/C [上／下] button.
(Enter COLOR TEMP menu.)
5. Color Temp. adjustment (HI)
5.1 Choose "TEMP" by R/C [上／下] button. Then choose value "HI" by R/C [左／右] button, then press [決定].
5.2 Input signal from specified terminal as shown below.
5.3 Choose "SOURCE" by R/C [上／下] button. Then choose the input from
the Input names (see below) in "SOURCE" by R/C [左／右] button.
Input names: PC
D
HDMI1 (to adjust HDMI input)
CVBS1 (to adjust Video input)
Input names indicated by red letters.
Then press R/C [決定] button. -> Change to selected input.
5.4 Adjust Color temperature of HI.
Do not change B GAIN (keep the value 1024), change R GAIN and G GAIN, to meet the specified x and y value:
x = 0.266 +/-0.005, y = 0.270 +/-0.005.
5.5 After adjusting, write down the R GAIN, G GAIN, B GAIN value to paper as memo. Then calculate Gb and Bb as
shown below
Rb = [R GAIN] / [R/GAIN] * 1024 = 1024 (Always)
Gb = [G GAIN] / [R/GAIN] * 1024 = ____ (Calculated)
L26-H03B/ L26-H03W/ L32-H03B/ L32-H03W
Picture 4 COLOR TEMP Menu
Table 1 Signal setting for adjustment of Color temperature
(to adjust PC input)
(to adjust Component input)
9