Hitachi L26-H03B Service Manual page 10

Bb = [B GAIN] / [R/GAIN] * 1024 = ____ (Calculated)
5.6 Change R GAIN value to Rb, G GAIN value to Gb, B GAIN value to Bb.
5.7 To adjust color temp of another input, change input name and input signal, then repeat 5.1 to 5.6.
6. Set picture mode "スタンダード" by Menu.
6.1 Exit FATORY MODE by [メニュー] button.
6.2 Enter the "トップメニュー" by R/C [メニュー] button. Then forward to "映像設定" - "画質設定". ("画質設定"
menu indicated.)
6.3 Confirm that "対象コンテンツ" is set to "共通".
6.4 Set "映像モード" to "スタンダード". Then exit "トップメニュー" by [メニュー] button.
6.5 Re-enter FACTORY MODE. (see 6.1.1 item 3.)
7. Color Temp. adjustment (MID)
7.1 Choose "TEMP" by R/C [上／下] button. Then choose value "MID" by R/C [左／右] button, then press [決定].
7.2 Input signal from specified terminal as shown in 5.2.
7.3 Choose "SOURCE" by R/C [上／下] button. Then choose the input from the input names in "SOURCE" by R/C
[左／右] button. Then press R/C [決定] button. -> Change to selected input.
7.4 Adjust Color temperature of MID.
Do not change R GAIN (keep the value 1024), change G GAIN and B GAIN, to meet the specified x and y value:
x = 0.285 +/-0.005, y = 0.293 +/-0.005.
7.5 To adjust color temp of another input, change input name and input signal, then repeat 7.1 to 7.4.
8. Color Temp. adjustment (LOW)
8.1 Choose "TEMP" by R/C [上／下] button. Then choose value "LOW" by R/C [左／右] button, then press [決定].
8.2 Input signal from specified terminal as shown in 5.2.
8.3 Choose "SOURCE" by R/C [上／下] button. Then choose the input from the input names in "SOURCE" by R/C
[左／右] button. Then press R/C [決定] button. -> Change to selected input.
8.4 Adjust Color temperature of LOW.
Do not change R GAIN (keep the value 1024), change G GAIN and B GAIN, to meet the specified x and y value:
x = 0.314 +/-0.005, y = 0.316 +/-0.005.
8.5 To adjust color temp of another input, change input name and input signal, then repeat 8.1 to 8.3.
9. Choose "SAVE" by R/C [上／下] button. Then choose value "1" by R/C [左／右] button, then press [決定].
(After this, value returns to "0" automatically.)
10. Choose "PQCOFF" by R/C [上／下] button. Then choose value "0" by R/C [左／右] button, then press [決定].
L26-H03B/ L26-H03W/ L32-H03B/ L32-H03W
10