Hitachi L26-H03B Service Manual page 14

6) Choose "F/W UPDATE" by R/C [上／下] button.
Then press R/C [右] button. -> Value changes 0 to 1 (red letter).
Then press R/C [決定]. -> F/W UPDATE started.
7) "Start update" message displayed on boisclair updater window.
In case that "start update" comment not displayed.
- Please confirm that the Hub controller is connected to Main Board with Ethernet cable correctly and firmly.
- Please confirm that PC network setting is correct.
8) After a few minutes, "complete file system update" message displayed.
9) After "complete update" message displayed, please turn main power switch off TV, and close "boisclair updater
window". -> FW update has finished.
L26-H03B/ L26-H03W/ L32-H03B/ L32-H03W
Picture 13 OPTION Menu
Picture 14 "start update"
Picture 15 "complete file system update"
Picture 16 "complete update"
14