Hitachi L26-H03B Service Manual page 11

L26-H03B/ L26-H03W/ L32-H03B/ L32-H03W
6.2 Firmware update
1. Preparation (as picture 5)
1) Connect to 1 port of Hub from Ethernet port of PC with Ethernet cable(straight type).
2) Connect to another port of Hub from LAN connector of L22/26/32-H03 with Ethernet cable (straight type).
Caution: Do not connect other PC.
Picture 5 How to Setup (example)
2. Settings
1) If the update tool "Boisclair updater window" is not installed, install it. ( Please see Page17)
2) Open the "Control Panel" - "Network" - "Local Area Network", and open its Property. (as picture 6)
Picture 6 Open Property
3) Choose "Internet Protocol" and open its Property as shown below.
Picture 7 Property
4) Set IP address and Subnet mask as below;
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
11