Voice Dialling
Voice Service
Voice recognition allows you to say commands to perform common functions
supported by your phone. There is no voice training required to use the voice
recognition feature. You simply say the pre-designated command displayed on
your screen in a normal tone of voice to perform the desired function.
To activate voice recognition:
1. Press and hold the
2. Wait for the beep and then say one of the following commands:
•
Contact Name
•
Contacts
When it recognizes one of these commands, the phone launches the associated
application. If the phone does not hear a command within approximately eight
seconds, it de-activates voice recognition without taking any action.
Note: If you want to use another button to activate voice recognition press
Menu, and select Launch Pad. Through this menu, you can change button
assignments, including the button used to launch "Voice Service", which is the
voice recognition application.
Using Voice Dial
Voice Dial allows you to dial by pronouncing a name stored in your Contacts.
key.
•
Voice Mail
•
Voice Memo
for
Voice Dialling 82