To set a camera option:
1. Start the camera. For more information, see "Taking Pictures" on page
40.
2. Press the right softkey
3. Press the number key corresponding to the desired option.
•
(1) Self Timer: Allows you to configure a timer for Off, 5 Sec. or 10
Sec.
•
(2) Fun Tools: Allows you to select:
Fun Frames: Allows you to select a frame to be placed around the
image before the picture is taken. Press the navigation key left or
right to select the desired frame. Press
the camera mode.
Color Tones: Allows you to select between several different color
tones including Auto, Negative, Sepia, Emboss, Aqua,
Monochrome (black & white), and Sketch by pressing the
navigation key left or right. When you find the desired tone, press
•
(3) Controls: Allows you to set the Brightness, White Balance, and
Night Shot for your pictures.
Brightness: Allows you to set the brightness level. Press the
navigation key left or right to increase or decrease the desired
brightness.
White Balance: Allows you to set up the white balance of the
camera automatically or manually using the different preset modes.
The modes available are:
41 Camera
.
•
Auto: Automatically adjusts the lighting.
•
Sunny: Decreases the light sensitivity for taking pictures in full
or mostly sunny conditions.
•
Cloudy: Increases light sensitivity for taking pictures under
cloudy conditions.
•
Tungsten: Adjusts the white balance to match the inside
lighting conditions displayed using common household light
bulbs.
•
Fluorescent: Adjusts the white balance to match the inside
lighting conditions displayed using common fluorescent
lighting.
for Options.
to select it and return to