Samsung SCH-u540 Series User Manual page 89

u540_Telus_UG.book Page 79 Thursday, September 20, 2007 12:54 PM
USB cable must be connected between the two devices before any
printing can occur.
To use PictBridge to print pictures from your phone:
1. Insert one end of the accessory cable into the USB slot on
the printer. (Printer must support PictBridge technology.)
2. Press
3. Press
4. Press
5. Press
6. Insert the USB cable into your phone.
7. Read the on-screen "Connect Printer" message and press
the left soft key
8. Select the image gallery (Photo Gallery, MMS, or
Transferred Images) and press
9. Highlight the desired image and press the left soft key
for Next. (To select multiple images, press
check mark next to each image selected.)
10. Highlight Copies and press the navigation key left or right
to select the desired number of copies to print.
11. Press the navigation key down to select Size. Press the
navigation key left or right to select one of the following
sizes: 4x6 or Default.
:
Note These sizes are may vary and are dependent on the printer's
capabilities.
12. Press the navigation key up to select Type. Press the
navigation key left or right to select one of the following:
for Menu.
for Camera & Video.
for Camera.
for PictBridge Print.
for OK.
.
to place a
Camera & Video 79