General; Tools Required For Installation (Not Supplied); Accessories Supplied With Unit; Type Of Copper Tube And Insulation Material - Panasonic S-12MY2U6 Installation Instructions Manual

1. GENERAL

This booklet briefly outlines where and how to install the air conditioning system. Please read over the entire set of instructions for the indoor
and outdoor units and make sure all accessory parts listed are with the system before beginning.

1-1. Tools Required for Installation (not supplied)

1. Flathead screwdriver
2. Phillips head screwdriver
3. Knife or wire stripper
4. Tape measure
5. Carpenter's level
6. Sabre saw or keyhole saw
7. Hacksaw
8. Core bits
9. Hammer
10. Drill
11. Tube cutter
12. Tube flaring tool
13. Torque wrench
14. Adjustable wrench
15. Reamer (for deburring)

1-2. Accessories Supplied with Unit

4-Way Cassette 60×60 (Y2 type)
Name
Drain hose with a clip
Heat Insulator
Band for refrigeration
tubing
Flat washer for M10
Screw M5
Band for power supply
cord
Operating Instructions
Installation Instructions
Warranty card
Use 3/8" (M10) for hanging bolts.
●
Field supply for hanging bolts and nuts.
●

1-3. Type of Copper Tube and Insulation Material

If you wish to purchase these materials separately from a local
source, you will need:
1.
2.
3.
Check local electrical codes and regulations before obtaining
wire. Also, check any specified instructions or limitations.

1-4. Additional Materials Required for Installation

1.
2.
Q'ty
3.
1
4.
5.
2
6.
4
8
4
2
1
1
1
5
Deoxidized annealed copper tube for refrigerant tubing.
Foamed polyethylene insulation for copper tubes as required
to precise length of tubing. Wall thickness of the insulation
should be not less than 5/16" (8 mm).
Use insulated copper wire for field wiring. Wire size varies
with the total length of wiring. Refer to 4. ELECTRICAL
WIRING for details.
CAUTION
Refrigeration (armored) tape
Insulated staples or clamps for connecting wire (See your
local codes.)
Putty
Refrigeration tubing lubricant
Clamps or saddles to secure refrigerant tubing
Scale for weighing