Lighting Instructions
Burner Control
WARNING!
Open lid
WARNING!
Ensure all burner controls are in the off position. Slowly turn on the cylinder gas
supply valve.
2. Push and turn any main burner control knob slowly to the 'hi' position. This action will ignite the
3. If the burner does not ignite, then immediately turn the control knob back to the 'off' position and
4. If the burner will not ignite within 5 seconds, turn the control knob to the 'off' position and wait 5
minutes for any excess gas to dissipate, either repeat steps 2 and 3 or light with a match.
5. If lighting the unit with a match, clip the match into the supplied lighting rod. Hold the lit match
down through the grill while turning the corresponding burner valve to high.
Main Burner Lighting
1. Open grill lid
selected burner.
repeat step 2 several times.
9
EN
www.napoleongrills.com