Print Media Transport - Lexmark C522 Service Manual

Print media transport

The print media is picked from the input source and fed to the bump aligner roll. The media movement is
detected by a sensor located in the paper pick mechanism. It does not matter where the media comes from (Tray
1, Tray 2, or, the MPF); it will enter the electrophotographic process at the bump aligner drive. The bump aligner
motor drives the bump aligner roll which feeds the paper to the transfer belt.
500-sheet assembly
pick tire
Bump aligner roll
Pick tire
Backup aligner roll
MPF pick tire
Diagnostic aids
5022-xxx
3-33