Env Prompts; Jobs On Disk; Disk Encryption; Duplex Gloss - Lexmark C522 Service Manual

Env Prompts

Controls the source the printer selects for a change envelope source message. The printer displays the change
envelope message based on the size of the envelope requested and not by the envelope type.
Selections include Auto, MP Feeder, and Manual Env. MP Feeder is only available on some printer models.
Note: If the Configure MP setting is changed to Manual, and a power-on reset is performed, and the value of the
Env Prompts menu item before the power-on reset was MP Feeder, then when the printer restarts, the printer
automatically changes the Env Prompt setting to Manual Env.
Load Manual overrides that would result in a change paper message are disabled for Paper or Env prompts that
are set to Manual, Manual Paper, or Manual Env.

Jobs on Disk

Lets the user select whether or not the printer deletes all buffered jobs on the hard disk. This menu item only
appears if a hard disk is installed. It appears even if no buffered jobs exist on the hard disk.
Selections include Do Not Delete and Delete.

Disk Encryption

Controls whether the printer encrypts the information that it writes to the hard disk.
Warning: When the value for Disk Encryption, the printer completely formats the hard disk which means that all
information on the disk is deleted.
Note: If an encrypted disk is removed from the printer and another disk is installed, the Disk Corrupted.
Reformat? message appears. The newly installed disk must either be formatted or removed from the printer.
Selections include Disable (default) and Enable. When Disk Encryption is selected, Yes or No appears for you to
confirm. Select either Yes or No, and press Select to continue. To cancel, select No.
The Disk Encryption menu item only appears when:
•
A non-defective disk is installed in the printer.
•
The values of bits 3-2 of digit 4 in the Configuration ID 2 are either 01 for Supported, or 10 for Supported
with an internal network adapter (INA).
A graphic appears, showing:
•
The message Encrypting Disk or Formatting Disk
•
A percentage scale
•
The message DO NOT POWER OFF
The process is complete when the percentage scale displays 100.

Duplex Gloss

Generates higher quality duplex copies than when using the normal duplex mode. The major difference between
normal duplex and duplex gloss mode is the number of sheets in the duplex print media path. Normal duplex
mode feeds two sheets simultaneously, while duplex gloss feeds only one sheet.
Selections include Off (default) and On.
5022-xxx
3-25
Diagnostic aids