Yamaha YZF-R1B 2012 Service Manual page 103

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
1. Oil level switch lead
2. Gear position sensor lead
3. Rear speed sensor lead
4. Sidestand switch lead
5. Fuel tank overflow hose
6. Fuel tank breather hose
7. Coolant reservoir breather hose
8. Sidestand switch
9. AC magneto lead
10.Frame
11.Main harness holder
12.Main harness
13.Drive sprocket cover
14.Water pump bypass hose
A. To the rectifier/regulator
B. Route the thermostat bypass hose 2 under
the main harness.
C. Route the oil level switch lead, gear posi-
tion sensor lead and rear speed sensor
lead through inner side of the coolant res-
ervoir tank and to main harness.
D. To the fuel tank
E. Push the fuel tank breather hose, fuel tank
overflow hose and sidestand switch lead
inside of the flange of the drive sprocket
cover.
F. 30–50 mm (1.18–1.97 in)
G. Route the fuel tank breather hose, fuel tank
overflow hose and coolant reservoir
breather hose inner side of the water pump
bypass hose, then through the binding
clamp on the sidestand switch and to the
outside of the under cover. End of the
hoses can face in any direction.
H. To the oil level switch
I. Route the AC magneto lead through inner
side of the coolant reservoir tank and front
and under the thermostat housing and to
right side of the vehicle.
J. Fasten the main harness and route it
through the hole on the side of the main
harness holder. Align it to the main har-
ness tape (purple). Do not cut the end and
face it inside of the vehicle (same for right
& left).
K. Outside of the vehicle.
L. Order insignificant-oil level switch lead,
sidestand switch lead.
M. Inside of the vehicle.
email: info@motomatrix.co.uk
2-62
CABLE ROUTING