Precor C842 Service Manual page 11

26. The message KEYBOARD TEST will be momentarily displayed. A representation of each
key on the keyboard will be displayed. Pressing a key will cause the representation to
change, indicating that the key is functioning normally. Test all of the keyboard keys in this
manner.
27. Press the SELECT key to continue to the heart rate test.
28. The Polar filtered heart rate will be displayed as P
toggle the display to the filtered heart rate, displayed as F XX. Pressing the SELECT key
again will toggle the display the unfiltered heart rate, displayed as U XX.
29. Press the RESET key to continue to the battery test.
30. The message BATTERY TEST will be momentarily displayed.
31. A message will scroll indicating that the optional external is or is not conne cted. Pressing the
SELECT key will cause a message to be displayed indicating the battery condition. Pressing
the SELECT key again will display the actual battery voltage as BATTERY XX.X.
32. Press the RESET key to continue to the RPM test.
33. The message RPM TEST will be momentarily displayed.
34. The message RPM PULSE will be momentarily displayed, followed by the actual RPM
reading.
35. Press the SELECT key to continue to the brake test.
36. The message BRAKE TEST will be momentarily displayed.
37. The message POWER BITS will be momentarily displayed, followed by the power bit
reading. The power bit reading will change in correspondence with any change in the
resistance level. Pressing the SELECT key will toggle the display to the resistance level.
38. The message RESISTANCE LEVEL will be momentarily displayed, followed by the current
resistance level setting.
39. Press the RESET key to exit the program.
C842, C842i, C846, C846i Upright and Recumbent Cycle
XX. Pressing the SELECT key will
Page 11