Adjusting The Projector's Elevator; Operation - Dukane 8230W User Manual

Adjusting the projector's elevator

The projector has Front foot for inclinations and Rear foot for horizontals. Spacers
on the each elevator foot are installed at the time of shipment, and projector is in a
condition to be able to just project. If necessary, detach the spacer, and the elevator
feet can be manually twisted to make more precise adjustments.
Front foot
Rear foot
Spacer
WARNING ►Keep the spacers away from children and pets. Be careful not
to let them swallow the spacers. If swallowed, consult a physician immediately
for emergency treatment.
NOTE • The adjustment angle can be adjusted up to plus or minus 1° each
of foot.
• After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.
If change the setting place of the projector, it will recommend keep and reuse the
spacers.

Operation

INPUT button
Displaying and switching the image
Press the INPUT button. Each time you press the button, the projector switches
its input port in turn. You can also use the remote control to select an input signal.
0~2°
Front foot
STANDBY/ON INPUT MENU
LAMP
TEMP
POWER
11
Rear foot
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
D-ZOOM
- +
INPUT button
PAGE MAGNIFY MYBUTTON VOLUME
UP ON
1 ＋
DOWN OFF 2 ー
KEYSTONE TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET
-1~1°
Spacer