Turning On The Power - Dukane 8230W User Manual

Turning on the power

1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
2.
Make sure that the POWER indicator is
steady orange.Then, remove the lens
cover.
3.
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp lights up, and the
POWER indicator begins to blink green.
When the power is completely on, the
indicator will stop blinking and light in steady green.
WARNING ►Do not touch around the lamp cover and the exhaust vents
during use or just after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the projector
automatically turn on. For more information, please see the "Operating Guide" in the CD.
STANDBY/ON
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
D-ZOOM
- +
PAGE MAGNIFY MYBUTTON VOLUME
UP ON
1 ＋
DOWN OFF 2 ー
KEYSTONE TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET
10
INPUT MENU
LAMP
TEMP
POWER