Turning Off The Power - Dukane 8230W User Manual

Operation (continued)
NOTE • The ASPECT button does not work when no proper signal is inputted.
• For details, see the Operating Guide in the CD.
• There may be some noise and/or the screen may flicker for a moment when
an operation is made. This is not a malfunction.

Turning off the power

1.
Press the STANDBY/ON button on the
projector or the remote control.
The message "Power off?" will appear on
the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while
the message appears.
The projector lamp will go off, and the
POWER indicator will begin blinking in
orange. Then the POWER indicator will stop
blinking and light in steady orange when the
lamp cooling is complete.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING ►Do not touch around the lamp cover and the exhaust vents
during use or just after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE • Please power off the projector after any connected devices are
powered off.
• This projector has the AUTO POWER OFF function that can make the
projector turn off automatically. For more information, please see the "Operating
Guide" in the CD.
STANDBY/ON button
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
PAGE MAGNIFY MYBUTTON
UP ON
DOWN OFF
KEYSTONE TEMPLATE
ESC
ENTER
POSITION
13
POWER indicator
MENU
STANDBY/ON INPUT
D-ZOOM
- +
VOLUME
1 ＋
2 ー
FREEZE AV MUTE
MENU
RESET
LAMP
TEMP
POWER