Part
DOOR REVERSAL
(Continued)
24 _ Disassembly and Reassembly
figure
11. Turn the Holder-Glass upside down and remove
12. Remove 2 Support-Hinges and the Hinge-Door.
13. Remove the screw, insert the removed screw into
14. Assemble the Support-Hinge and the Hinges that
15. Fasten the 8 screws that you removed in Step 11.
16. Install 2 Guide-Holder Glasses onto the other side.
17. Assemble the Holder-Glass by sliding it so that the
Description
the 8 screws.
the bottom hole, and then fasten it.
you removed in Step 12, as shown by the figure
below.
upper hook is caught and fasten the 15 screws that
you removed in Step 9.