Part
DOOR REVERSAL
(Continued)
figure
1. Unplug the power cord.
2. Remove the two hinge screws from the door.
3. Remove the door by lifting it.
4. Remove the two screws from the lever-holder and
5. Assemble the lever-holder using the screws that
6. Remove the two screws from the Frame-Front.
7. Fasten the screw into the hole on the other side.
8. Remove 2 Cushion-Cover(F)s from the bottom.
9. Remove the 15 screws.
10. Remove the Holder-Glass.
Description
then remove the screw on the opposite side from
the lever-holder.
were removed from the lever-holder-in Step 4 and
then fasten the screw marked by the circle in the
figure to the opposite side from the lever-holder.
Disassembly and Reassembly _ 23