Part
Door Removal
frame front
Removal
figure
7. Remove the Support-Hinge, Hinge-Door, Guide
1. Disconnect the power supply to the unit.
2. Remove the Panel Control, the Main PCB and the
3. Remove 4 screws from the Frame Front.
5. Remove 3 screws.
6. Remove the Door Switch Housing.
7. Lift the Frame Front off the three tabs across the
Description
Holder Glass, Door Glass and Door Seal.
A. Be careful not to scratch the Cover Door.
B. Be careful of the damage to the Door Glass.
C. Check the Door Seal condition after the
assembly.
Cover Top.
When 2 screws of the top portion work because
was added newly, keep in mind.
When reassemble Door Switch to Frame Front,
be careful for insert direction.
bottom and remove.
Disassembly and Reassembly _ 13