Part
Drum Back Removal
Duct Exhaust
Removal
22 _ Disassembly and Reassembly
figure
7. Remove the terminals from the Valve-Water.
8. Remove 4 screws from the Air Duct.
1. Disconnect the power supply to the unit.
2. Remove 1 screws from the Back-Cover.
3. Remove 1 screw from the Duct-Exhaust.
Description
Be careful of the frame edge.
In case the screws for fixing a power code are
dropped into the dryer, after removing Duct
Exhaust, you can put it out through the hole.