4) Executing Memory Playback - Denon DN-2700F Operating Instructions Manual

(4) Executing Memory Playback

Load a disc or discs for which memory data has been previously stored. If a disc has memory data, it is identified
and the MEMORY indicator on the LCD lights until press any button.
Press the MEM CUE button to prepare for memory playback. The MEM CUE LED flashes and preparations begin.
The MEMORY indicator lights.
When memory playback is ready, the MEM CUE LED stops flashing and remains lit. Loaded discs which have
memory data are cued to the start point from the first memory step for that disc. The playback order is indicated in
the memory section of the LCD.
Press the PLAY/PAUSE button for the side on which the PLAY indicator on the LCD is flashing to start memory
playback. The "MEMORY PLAY" indicator appears on the LCD. All memory steps for the currently loaded discs will
be played in order.
• In order to eliminate silence between tracks, Cue to Music and End Detect are implemented in memory play mode.
The point at which the sound starts on the track is found during preparations for memory playback (Cue to Music).
In addition, the point at which the sound ends on the track is also found (End Detect).
If the SINGLE indicator is lit during memory play mode, all memory steps for the currently loaded discs will be
played only once. If the CONTINUE indicator is lit, playback resumes from the beginning of the first track in the
memory, and repeats until memory playback is interrupted. Continuous/Single mode selection must be performed
after memory play mode is ready (the MEMORY LCD indicators and MEM CUE LED are lit solid).
Press the MEM CUE, PLAY/PAUSE or CUE buttons to interrupt memory playback. The operation differs as follows
depending on which button is pressed:
MEM CUE button
PLAY/PAUSE button
CUE button
To cancel the memory play mode, open the disc holder.
CAUTION: If pressing the following buttons, memory playback will be cancelled, although memory playback reach
the end of current memory step, next memory playback can not start.
TRACK
A
Ten key (0 -r 9)
PLAY/PAUSE
Memory playback will not be cancelled if press PLAY/PAUSE and CUE button of memory playing side.
Figure 27
Press the PLAY/PAUSE button for the side on
which the PLAY indicator is flashing.
Figure 28
Exit memory play mode, continue normal play.
Pause, continue memory play mode.
Back cue to the point at which it started for that track, continue memory play
mode
SAMPLER
B
CUE
LOOP
JOG/SHUTTLE
23