Heat & Glo Soho24B Owner's Manual page 36

Figure 12.6.
Step 5. Carefully place a layer of stones over the pilot
shield to disguise it.
Figure 12.7.
Step 6. Spread the stones out evenly. Double check that
there is only one layer of stones on the burner area and that
the cross-hatched area in Figure 1 is still free of stones.
Figure 12.8.
Step 7. Carefully remove the stone placement jig making
sure that no stones fall into the pilot area.
36
Figure 12.9.
Step 8. This is a view of the front area of the pilot shield.
This area must be free of stones for safe operation.
Heat & Glo • Soho24B • 2137-900 Rev. P • 8/12
NO STONES IN THIS AREA NO STONES IN THIS AREA