Drive Cage Bracket Or Backplane - HP ProLiant ML310e Gen Maintenance And Service Manual

Four-bay LFF drive cage
o
Eight-bay SFF drive cage
o
To replace the component, reverse the removal procedure.
To convert the four-bay non-hot-plug drive cage to a hot-plug model, remove the cage bracket, and then
install the hot-plug backplane option before installing the cage back to the server
backplane" on page 34).

Drive cage bracket or backplane

To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
("Drive cage bracket or
Removal and replacement procedures 34