Operation And Display When Starting Diagnosis Function; Selection Of Diagnostic Menu; Other Functions Available While Diagnosis Function Is Active; Diagnosis Default Status - Yamaha RX-V396 Service Manual

RX-V396/RX-V396RDS/HTR-5230/HTR-5230RDS

3. OPERATION AND DISPLAY WHEN STARTING DIAGNOSIS FUNCTION

(1) Selection of diagnostic menu

The diagnostic menu and the sub-menu can be selected by using the front panel keys of the main unit or the remote
control unit.
G Selection by using the front panel keys of the main unit
The main menu can be changed cyclically by using the "PROGRAM
"PRESET/TUNING /
Reverse
Main menu
G Selection by using the remote control unit
The remote control codes in the menu list (see right column
on page 8) correspond to the DSP program, test and effect keys.
See the figure on the right.

(2) Other functions available while diagnosis function is active

Listed below are the other functions available while the diagnosis function is active.
• Selection of the input (include TAPE MONITOR/EXTERNAL DECODER)
• Effect level control (CENTER, REAR, SUBWOOFER)
• Master volume control
• Muting on/off
• Power on/off

(3) Diagnosis default status

When not otherwise specified, default settings and values in each menu are as follows:
• SPEAKERS
• Electronic Volumes
• DYNAMIC RANGE
• LFE LEVEL
• CENTER DELAY
11
" keys. The " " key will increase the main or sub-menu number.
FRONT PANEL
Forward
: All "LARGE"
: All "0dB"
: MAX
: 0dB (–10dB in AC-3(DOLBY DIGITAL))
: 0ms
/ " keys, and the sub-menu, by using the
Reverse Forward
Sub-menu
CD TUNER TAPE/MD
7A-88
1 2 3
DVD/LD SAT/D-TV VCR
7A-8B
4 5 6
AUX EXT.DEC.
7A-8E
7 8 9
+ +
10 100
7A-91
0
ENTER CLEAR
TEST A/B/C/D/E EFFECT
DISC SKIP
--
+
PRESET
CH CH
7A-89
7A-8A
7A-8C
7A-8D
7A-8F
7A-90