Page 1
ELECTRIC-POWERED GO CART OWNER’S MANUAL Read and understand this entire manual before allowing child to use this product! For assistance contact Razor. DO NOT RETURN TO STORE. NOTE: Manual illustrations are for demonstration purposes only. Illustrations may not reflect exact appearance of actual product.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during DO NOT USE NON-RAZOR PARTS shipping. Because the Ground Force was 95 percent assembled and packed at the factory, there should not be any WITH YOUR GROUND FORCE.
Attaching the Seat Required Tool: 5 mm Allen Wrench WARNING: The lap belt arrangement supplied with the Ground Force is for “play” use only. It is not an ASTM-approved lap belt system and is not intended to function as an approved lap/ shoulder/seat restraining device.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
Position the wheel with with the notch in the wheel. Position wheel to remove. the Razor logo facing outward. the wheel with the Razor logo facing Install the washer and tighten the outward. Install the washer and self-locking nut securely.
Page 10
REPAIR AND MAINTENANCE Removing Rear Axle Required Tools: 17 mm Wrench, 3 mm Allen Wrench and Rubber Mallet Before you begin, carefully turn unit upside down for easier access. Using a 17 mm wrench, loosen Use a 3 mm Allen wrench to Use a 3 mm Allen wrench to locknut and remove rear wheel loosen the brake.
Page 11
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
Page 12
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer...
For more troubleshooting tips, a list of available replacement parts or to locate an authorized Service Center in your area, visit our website at www.razor.com or call toll free +1 866-467-2967 to speak to a live Customer Service Representative.
GROUND FORCE PARTS Keep your Ground Force running for years with genuine Razor parts. Visit our website or e-mail us for more information on spare part availability. (Specifications subject to change without notice.) 1. Screw, M6*12 mm for Steering Wheel 12.
Page 15
NOTICE: INSURANCE YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTER/ELECTRIC RIDE-ON PRODUCT. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.