Table of Contents
Advertisement
12.
Automatic presser-foot lifter
04.11
Requirement
When solenoid 1 is activated, lever 3 for the roller presser must drop automatically.
Fig. 12 - 11
Move solenoid 1 ( screws 2 ) in accordance with the requirement.
Turn the machine on and check the requirement.
Turn the machine off.
Depending on the thickness of the material, the clearance between the roller
presser and the feed wheel can be increased to a maximum of 10 mm by
moving the solenoid to the right.
1
2
Adjustment
3
12 - 13
Advertisement
Table of Contents
