When To Change The Thread Lifters; Replacing The Thread Lifters - Miele S 6210 Operating Instructions Manual

Maintenance and care
When to change the thread
lifters
The thread lifters on the suction inlet of
the floorhead can be replaced.
Check them from time to time if the pile
has worn down.

Replacing the thread lifters

^ Use a knife or similar object to
remove the thread lifters from the
slots. There are two grooves to help
you.
^ Fit new thread lifters.
AirTeQ floorhead
^ Using a knife or similar object lever
the thread lifters out of their holders.
See positions marked red at the
sides.
^ Fit new thread lifters.
Cleaning the roller on the floorhead
(not possible with the AirTeQ floorhead)
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove it.
c Take out the roller.
^ Remove any threads and hair,
replace the roller and refit the
bearing.
Replacement parts are available from
your Miele dealer or from Miele (see
back cover for contact details).
24