Miele S 6210 Operating Instructions Manual page 11

Fitting the standard floorhead
^ Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
^ To release the floorhead from the
suction tube, press the release
button (see arrow) and pull the
suction tube away from the floorhead.
The floorhead can be used for all
normal cleaning of carpets and rugs. It
can also be used with the brush
protruding to vacuum hard flooring. For
hard flooring, such as stone and
parquet, we recommend using one of
the special Miele floor brushes (see
"Optional accessories").
It is important to observe the flooring
manufacturer's cleaning and care
instructions.
Depending on model, the floorhead will
have the following symbols:
– ö and ä
– % and )
Vacuum carpets and rugs with the
brush retracted:
^ Press foot switch ö or one of the two
foot switches %.
Clean hard flooring which is not
susceptible to scratching with the brush
protruding:
^ Press foot switch ä or one of the two
foot switches ).
Clean flooring which has deep
crevices or grooves with the brush
protruding.
Preparing for use
11