Stopping Boat (F4B, F5A, F6C); Stopping Engine; Procedure - Yamaha F6C Owner's Manual

Operation
EMU39882

Stopping boat (F4B, F5A, F6C)

EWM02321
WARNING
Do not use the reverse function to slow
down or stop the boat as it could cause
you to lose control, be ejected, or impact
the load or other parts of the boat. This
could increase the risk of serious injury. It
could also damage the shift mechanism.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle. The
stopping distance varies depending on gross
weight, water surface conditions, and wind di-
rection.
EMU27821

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU43611

Procedure

Procedure for stopping engine (F2.5A)
1. Push and hold the engine stop button un-
til the engine comes to a complete stop.
2. After stopping the engine, tighten the air
vent screw on the fuel tank cap and set
the fuel cock to the closed position.
55
TIP:
The engine can also be stopped by pulling the
cord and removing the clip from the engine
shut-off switch.
Procedure for stopping engine when using
built-in fuel tank (F4B, F5A, F6C)
1. Push and hold the engine stop button un-
til the engine stops completely. The en-
gine can also be stopped by pulling the
engine shut-off cord and removing the
clip from the engine shut-off switch.