F2.5A
1. Trim operating angle
F4B, F5A, F6C
1. Trim operating angle
EMU42830
Adjusting trim angle for manual tilt
models
EWM00400
WARNING
Stop the engine before adjusting the
G
trim angle.
Use care to avoid being pinched when
G
removing or installing the rod.
Use caution when trying a trim position
G
for the first time. Increase speed gradu-
ally and watch for any signs of instability
or control problems. Improper trim an-
gle can cause loss of control.
There are 4 or 5 holes provided in the clamp
bracket to adjust the outboard motor trim an-
gle.
1.
Stop the engine.
2.
Tilt the outboard motor up, and then re-
move the trim rod from the clamp bracket.
Operation
1
ZMU06754
60