Exterior Lighting And Signals - Renault Talisman Driver's Handbook Manual

EXTERIOR LIGHTING AND SIGNALS

1
2
Side lights
š
Turn ring 4 until the symbol is
opposite mark 3. This indicator light on
the instrument panel comes on.
The brightness of the instrument panel
and dashboard can be adjusted by tur-
ning control knob 2. If the side lights are
not switched on, it is not possible to set
the brightness of the instrument panel
with control knob 2.
1.86
(1/5)
3
4
Main beam headlights
á
With the dipped
headlights lit, push stalk 1. This indica-
tor light on the instrument panel comes
on.
To return to the dipped headlight posi-
tion, pull the stalk 1 towards you again.
If driving on the left in a left-hand
drive vehicle (or vice versa), drivers
must have the lights adjusted by an
authorised dealer for the duration of
the trip.
Dipped beam
k
headlights
1
Manual operation
Turn ring 4 until the symbol is opposite
mark 3. This indicator light on the ins-
trument panel comes on.
Automatic operation
Turn ring 4 until the AUTO symbol is op-
posite mark 3: with the engine running,
the dipped beam headlights switch on
or off automatically depending on the
brightness of the light outside, without
any action on stalk 1.
beam
Before driving at night:
check that the electrical
equipment is operating cor-
rectly. As a general precau-
tion, check that the lights are not
obscured (by dirt, mud, snow or ob-
jects being transported).