Manual Operation - Renault Talisman Driver's Handbook Manual

ELECTRONIC PARKING BRAKE
1
2

Manual operation

You can control the electronic parking
brake manually.
Applying the electronic parking
brake
Pull switch 1. Warning light 2 and warn-
}
ing light on the instrument panel
light up.
Releasing the electronic parking
brake
With the ignition on, depress the brake
pedal then press switch 1: warning
}
light 2 and warning light
2.16
(2/3)
Brief stop
To manually activate the electronic
parking brake, (when stopping at a red
light, or stopping when the engine is
running, etc.): pull and release switch 1.
The brake is released as soon as the
vehicle is started up again.
Special feature relating to
the Stop and Start func-
tion: in the event of un-
f a s t e n i n g
er 's seat
engine goes to standby using
the Stop and Start function, make
sure the parking brake is engaged:
warning light
the instrument panel to confirm this.
Risk of loss of immobilisation.
go out.
t h e d r i v -
belt before the
}
will come on
Special cases
To park on a slope or while towing a
trailer, for example, pull switch 1 for
a few seconds to gain the maximum
braking.
To park the vehicle without applying the
electronic parking brake (if there is a
risk of freezing, for example):
– with the engine running, while simul-
taneously depressing the brake pedal
and switch 1, stop the engine (not
standby for vehicles fitted with Stop
and Start);
– with a gear or position P engaged, re-
lease the brake pedal and switch 1.
For vehicles fitted with a Stop and Start
function, with the engine on standby,
the electronic parking brake is automat-
ically activated if the driver unfastens
their seat belt and opens the driver's
door or gets out of their seat.