Venting Options/Electrical Connection/Control
Venting Options
For detailed information refer to the Installation Instructions for the Vitodens 200-W, B2HA Venting System.
Vent Connection, models B2HA 100
Electrical Connections
Power Supply
The Vitodens 200-W requires a 120 VAC power supply
from a wall receptacle (15A fuse protected circuit).
Refer to the Installation Instructions for wiring details or
reference the "Overview of Electrical Connections" on
pages 42 and 44 of this manual.
Power Supply Connection of Accessories
The power supply connection of accessories can be made
directly at the boiler control. The connection is activated
and deactivated with the system on/off switch.
The mixing valve accessory kit and the Vitosolic control (if
used) will require a separate 120 VAC power supply from
the wall receptacle.
22
Vitodens 200-W B2HA 100 to 150 Technical Data
Vent Connection, models B2HA 112, 150
Wire cabling required for:
outdoor temperature sensor
■
Vitotronic 200-H, HK1B mixing valve control
■
■
accessory kit for heating circuit with mixing valve
Vitotrol 200 remote control
■
Vitotrol 300 remote control
■
remote switching of operating mode
■
remote disable
■
alarm output
■